Atom Time

• Originally designed to set the time on compatible watches.
• Also supports revealing a drawn clock on Teleport or showing a pocket watch image as a prediction.

Choose the output format within the mini-app before triggering.

How it Works

1. Install the Preview firmware (v2.4.1) to Atom in the MagiScript editor
2. Make sure that Atom and Teleport are charged
3. To launch the app, turn on Atom and press button #1 (top-left) in 5 seconds (while the LED is cyan). It will connect to Teleport automatically.
4. If you use it for the first time you need to change some settings in the PeekSmith App or in the MagiScript editor.

• In the PeekSmith App go to the Settings than connect to Atom under the CONNECT DEVICES tab, if you connected press Details than press Device Settings scroll down to ATOM TIME
• Open the MagiScript editor and connect your Atom. Press Atom Settings than go to Mini-Apps. Follow the Editor Basics guide if you need more details.

Send to Teleport

1. Off – It won’t send anything to Teleport
2. Pocket Watch Pic – It will send a picture to Teleport by a pocket watch(It can only send a picture of 30 minutes only times like 00;30)
3. Hand Drawn Clock – It will send a picture to Teleport by a Hand Drawn Clock

Enter Time

1. Now you can type a time. To set 5:00, press 5. By default, Atom will set the time after 3 seconds, but you can press the bottom-left “submit” button (#10) to send it immediately. To set 7:14, type 7, 1, 4.
   
2. If you need to correct the time you entered use the bottom right (#12) button for deleting the last digit.
   
   
3. You can also reset the time to the actual time. Enter 4444 or 9999, or long-press any of the buttons.