Changing the Straps
Your Bond device features 20mm quick-release straps, designed for both comfort and style. Replacing them is a simple process that allows you to customize your Bond in moments.
What You’ll Need
Replacement 20mm quick-release straps.
We recommend using quick-release straps for the easiest installation and best fit with your Bond.
Step-by-Step Guide
1. Remove the Current Strap
- Turn your Bond over to expose the back side of the strap.
- Locate the small metal lever (quick-release mechanism) on the strap.
- Slide the lever inward with your fingernail or a small tool, gently detaching the strap from the lug.
- Carefully remove the strap, ensuring no pressure is applied to the lugs.
2. Attach the Replacement Strap
- Take your new 20mm quick-release strap.
- Align one end of the strap with the lug pinhole on your Bond.
- Compress the metal lever on the strap to retract the pin, and position the strap between the lugs.
- Release the lever slowly, ensuring the pin locks securely into place.
- Repeat the process for the other half of the strap.
3. Check for Security
- Gently tug on both ends of the strap to ensure they are securely attached. The quick-release mechanism should hold the pins firmly in the lugs.
Tips for Choosing Replacement Straps
Look for 20mm straps specifically labeled as “quick-release” for compatibility.